Torque Converter

Holeshot 2400 Torque Converter

Holeshot 2400 Torque Converter; 2300 - 2500 RPM Stall; 10 in. Bolt Circle;

B&M Holeshot 2400 for 1967-81 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions (Non-lock-up) with 24 spline input and a 10-inch bolt circle. The Holeshot 2400 converter is good for vehicles with some performance engine modifications, particularly big cams that tend to reduce low-end power and torque. The higher stall speed of this converter will launch the car in a higher rpm range where more torque is readily available, resulting in quicker acceleration. Holeshot converters feature furnace brazed impeller fins and turbine, new precision alloy impeller hub and new heavy duty needle bearings. Other features include fully balanced and pressure tested by expert technicians. If your vehicle is equipped with a plate type nitrous system or supercharger, please refer to the Nitrous Holeshot line of converters. Notes: Stall speed listings are based on engines producing 230lb ft of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Higher stall converters can generate more heat, so we highly recommend adding a transmission cooler. This converter is Not recommended for supercharged, plate-type nitrous oxide or trans-brake applications. The product images shown are for illustration purposes only and may not be an exact representation of the product.

As performance enthusiasts today, most people are accustomed to having access to whatever performance parts they need for their vehicle readily available at their local dealer. It usually never crosses anyone's mind who invented these products? Who was the first to identify the need, then develop and manufacture that product? Since the very early 1950s, B&M has been at the vanguard of the growing automotive aftermarket. Racers themselves, B&M's founders identified the needs of local racers and street performance enthusiasts, and developed products to fill those needs. As the industry grew so did B&M. And as racers went faster, B&M developed products to help them break the records they just set. In the 50's it was B&M who came up with the idea of using a performance reinforced Hydramatic for racing. In the 60s it was B&M who developed shifters to go along with it, and later in the decade came race converters. In the 70's shift and transmission improving kits, and always the constant refinements and expansion of existing product lines. If you've ever raced a vehicle, or driven a hot rod with an automatic transmission, high stall torque converter, an aftermarket automatic shifter, or performance enhancing shifting kit, thank B&M. From Trick Shift performance ATF to reverse pattern valve bodies, 1.80 gearsets to cool canisters, the list of firsts goes on and on. It's this tradition that keeps moving B&M to identify and develop what the performance enthusiast needs. As racing and street performance has spread globally, B&M has taken it's extensive knowledge and experience and applied it to the needs of racers, everyday drivers and hobbyists around the world. Keep looking to B&M to continue to be amongst the very first to identify vehicle needs in the global automotive aftermarket, supplying enthusiasts and racers what they need, performance!