Authorized Vossen Dealer
A rugged multi-spoke design built as a Hybrid Forged wheel. Pre-drilled 17" to 24" sets ready to ship for popular trucks, SUVs and cars, including 8-lug HD trucks, or machined to order for your 5-lug or 6-lug vehicle in five finishes.
RAM 1500 TRX · Vossen HFX-1
Shop by vehicle
Every vehicle page shows the sizes, offsets and tire sizes that fit, which sets are in stock to ship now, and what we can build to order.
Ready to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to Ship
Ready to Ship
Ready to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to ShipReady to Ship
Ready to ShipReady to Ship
Ready to ShipReady to ShipBuild to OrderReady to ShipReady to ShipReady to ShipTwo ways to buy
Vossen stocks the HFX-1 two ways. Pre-drilled sets are already machined for popular cars and ship right away. Blank wheels are machined to order for your exact car, in any custom finish.
Finishes
Six finishes are stocked pre-drilled for popular trucks, SUVs and cars. Five can be built to order for yours: Gloss Black and Satin Black come both ways. Build to Order sizes depend on blank stock.
The design
The HFX-1 takes its design from Vossen's forged LC3-01: bold spokes that run out to the lip, with a face that gets deeper as the wheel gets wider and the offset drops. The barrel is flow-formed: it's stretched under heat and pressure, which tightens the aluminum's grain and makes it stronger and lighter than a standard cast barrel.
The HFX-1 comes in 5-, 6- and 8-lug versions, built for the weight of trucks and SUVs. That's why one design fits everything from a BMW M5 or Tesla Model S to an F-150 Raptor, Land Cruiser or Super Duty.
Wheel sizing & offsets
You don't pick the concave separately. Vossen sets it by width and offset, so wider wheels with lower offsets get a deeper face. The letters in the chart below show which profile each size gets. Hover over or tap a letter to see what it means.
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 17×8.5 |
|
— |
| 17×9 |
|
— |
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 18×8.5 |
|
— |
| 18×9 |
|
— |
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 20×8.5 | Custom only |
|
| 20×9 |
|
|
| 20×9.5 |
|
|
| 20×10 |
|
|
| 20×10.5 |
|
|
| 20×11 |
|
|
| 20×11.5 | Custom only |
|
| 20×12 |
|
|
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 21×9 |
|
|
| 21×9.5 | Custom only |
|
| 21×10 | Custom only |
|
| 21×10.5 |
|
|
| 21×11 | Custom only |
|
| 21×11.5 | Custom only |
|
| 21×12 |
|
|
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 22×9 |
|
|
| 22×9.5 |
|
|
| 22×10 |
|
|
| 22×10.5 |
|
— |
| 22×11 | Custom only |
|
| 22×11.5 | Custom only |
|
| 22×12 |
|
|
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 23×10 |
|
|
| 23×10.5 |
|
|
| 23×11 |
|
|
| 23×12 | Custom only |
|
| Size | Pre-drilled bolt pattern · offset | Build to order offset range, any bolt pattern |
|---|---|---|
| 24×10 |
|
|
| 24×12 |
|
— |
Offsets are in millimeters (ET). Pre-drilled sizes are Vossen's stocked fitments. Build to order wheels are machined from a blank to your bolt pattern, center bore and any offset inside the range shown, subject to blank availability. Not sure what fits? We'll spec it for you.
Custom tailored
From a forged blank to a finished wheel machined for your exact bolt pattern, offset and concave. A quick look inside Vossen's process.
Real cars · Real fitment
HFX-1 builds by finish, from the F-150, Bronco and Super Duty to the Land Cruiser, Escalade and BMW M5. Filter by finish and tap any photo to view it full screen.
Build to order
The HFX-1 can be machined for your 5-lug car or SUV or your 6-lug truck or SUV. Tell us your vehicle and the stance you're after, flush, aggressive, leveled or lifted, and we'll spec sizes, offsets and concave with Vossen before anything is cut. 8-lug HFX-1 wheels are sold pre-drilled only.
Good to know
Ready to Ship sets are already drilled with the bolt pattern, offset and center bore for specific trucks, SUVs and cars, and ship in 1-2 business days. Build to Order wheels start as blanks that Vossen machines for your exact 5-lug or 6-lug vehicle in Gloss Black, Satin Black, Satin Silver, Satin Bronze or Anthracite, with the offset we spec or one you choose. Build to Order adds $600 per set.
About 1-2 weeks for most finishes and 2-4 weeks for Gloss Black once the blanks are reserved. HFX-1 blanks are limited, so sizes that are out show as sold out. Call us at 800-814-8423 for the current lead time on your set.
The HFX-1 comes in 5-lug, 6-lug and 8-lug versions. Each vehicle page lists the sizes and offsets we've matched to that vehicle, including lift and level notes and tire sizes where we have them. If yours isn't listed, Build to Order lets Vossen machine the bolt pattern, offset and center bore for most 5-lug and 6-lug vehicles, and we confirm fitment with you before anything is ordered. 8-lug HD truck wheels are sold pre-drilled only.
The concave isn't a separate option. It comes from the width and offset: narrower, higher-offset wheels get a flatter face, while wider, lower-offset wheels step up to Deep, Super Deep or Ultra Deep. The sizing chart above shows the profile for each size.
Yes. Vossen center caps come with every set. When a Ready to Ship wheel's center bore is larger than your hub, we include hub rings so the wheels center properly.
Hybrid Forged is Vossen's flow-forming process. The barrel is stretched under heat and pressure, which improves the grain structure of the aluminum and makes it stronger and lighter than a typical cast wheel, while the custom CNC machining lets each wheel be cut for a specific car.
Yes. The HFX-1 accepts TPMS sensors.
Every price on our HFX-1 pages is for a full set of 4 wheels at Vossen MAP pricing. Build to Order adds a flat $600 per set no matter the size.
Real reviews from Vibe Motorsports customers on Google.
I’ve been searching for the perfect rims for my Tesla for quite some time, and Vahan from Vibe Motorsports was incredibly patient with me over the past several months while I made up my mind. He took the time to answer all my questions without any high-pressure sales tactics. At the end of the day, I got the exact rims I wanted, and man, they are sweet! If you're looking to upgrade your ride, look no further than Vibe Motorsports, and definitely ask for Vahan.
Great to deal with just wish companys in the UK was this good and mice
Not all super heroes wear capes
Thank you
Super cool spot, nice waiting room … staff is very friendly and clean. Was in and out for my tire change way better than big chain stores + they have awesome rims / tires etc
Ordered Stance SF03 through Vibe Motorsports and they had great customer service. Originally the lug nuts that they sent were the wrong size for my car, so they overnight shipped new lug nuts to my installers shop immediately and everything worked out. Rims look great
Ryan was a huge help getting an exhaust for my Lexus RCF. He was extremely knowledgeable, answered all my questions, and made the whole process easy. Shipping was also super quick and everything arrived exactly as expected. Definitely recommend working with Ryan and Vibe Motorsports if you’re looking for great customer service and someone who actually knows the products they’re selling.
The team at Vibe are always professional, courteous and they KNOW cars and wheels. I have trusted them with all of my vehicles for years and I won't go anywhere else. I highly recommend them for all of your wheel needs!!
Ordered a set of Stance wheels for my Camaro from Tom O. He took the time to ask about my plans for the car and was very knowledgeable about what to pass along to Stance to get the fitments right. He was also super prompt about returning emails and kept me informed the whole time. Total time from placing the order to delivery of the wheels was right around 4 weeks including a break for Thanksgiving (which was right about what Tom estimated up front). I have no complaints about the process and I'll be contacting Vibe again the next time I need a set of wheels.
Great communication and answered all my questions.
Highly recommend them
Could not be happier with customer service!!!